VB Screws

These should just be considered to be approximate.

Thread (major) diameter = 3.06 mm
Root (minor) diameter = 2.38 mm
length = 11.8mm
Head diameter = 5.28 mm
thread spacing = 1.1mm

I used a sample size of 1, so it must be right! I am a little unsure on the thread size.

I took the VB screws with me to Menards and found a replacement.

It’s a pack of 22 “Sheet Metal #4 1/2″ Combo Pan Head” screws. They fit in the VB perfectly, and have the same thread spacing and approximately the same dimensions as the VB screws, only slightly longer in length. This didn’t seem to be a problem at all when I was fitting them in the VB screw holes. The top of these screws have a combo head that will accommodate a standard flat head screwdriver or a Philips. I bought a slender Philips driver with a magnetic tip while I was there and it worked perfect for this application.

So yeah, I imagine any screws that fit the description above will work in the VB. If anything you want screws that are slightly shorter than 1/2″, but 1/2″ should work. The only other difference between these screws and the VB screws is the ends of the VB screws are flat, and these are pointy. It doesn’t matter though.

You never want to put your NES back together then? 🙂

Nice! I always thought about making a HTPC in a NES case.

Deadly-D wrote:

Vaughanabe13 wrote:
Nice! I always thought about making a HTPC in a NES case.

Dude you should go for it! I’m not very far with it at all. All i’ve done is used a dremel to holo it out. I have too many projects right now 1 my MAME Arcades hard drive burned out 2 NES PC 3 I have a VB housing that i want to put led’s in so the eyes light up red and 4 i want to build what looks like an old 50’s TV but its really a multiple game emulator. Lol sorry didn’t mean to hi jack the thread.

I wish, but I have a lot of projects going on too, plus my last semester of classes are starting next week and I’ll also be working part time. Maybe some day!