Original Post

I realize this may be a noob question, but I was curious if anyone out there has experimented with 3D printing VB carts (the plastic casing, not the insides, duh!). I guess I feel a bit bad about people cannibalizing Mario tennis for custom carts…

Is this crazytown talk?

6 Replies

I believe it is possible to an extent. My flashboy looks 3D-printed. I’ll post pictures later.

Ah, yes!

I don’t suppose anyone has the 3D model of the cart either?

It can be done but only the main case, front and back, not the connector strip, those still need to come from a cart (or someone did find something that works but not sure on availability etc)
Anyway here are copies of my model of a front and back cart case, STL format.

2 versions here, simple front and rear has 4 screws holding the halves together, the other front and rear are detailed copies of the originals with text etc.

Have fun printing and post pics of what you make.

Hedgetrimmer wrote:
It can be done but only the main case, front and back, not the connector strip, those still need to come from a cart (or someone did find something that works but not sure on availability etc)
Anyway here are copies of my model of a front and back cart case, STL format.

2 versions here, simple front and rear has 4 screws holding the halves together, the other front and rear are detailed copies of the originals with text etc.

Have fun printing and post pics of what you make.

:thumpup: :thumpup: :thumpup:

Lester Knight wrote:
http://www.planetvb.com/modules/newbb/viewtopic.php?topic_id=6059&forum=3

Something like this?

This is what my flashboy shell looks like.

 

Write a reply

You must be logged in to reply to this topic.