RunnerPack wrote:
Like realyst says, more pictures are needed.
To that end, I’ve attached a pic (excuse the webcam quality) of all the parts of the clamp (with the legs removed).
If you have all of them, just put them together in alphabetical order and it should work.
It should not be possible to separate the clamp pieces that far without removing the cap nut (F) from the bolt (A), which are clearly both there and attached in your pic. Something’s probably broken or missing.
Without seeing the other side, it’s hard to tell what’s going on. By looking at mine and comparing it to what I can see of yours, it looks like either the spacer (B) is missing or there’s something wrong with the bolt (A).
I hope that helps.
OK, i took apart the clamp, followed the above instructions and worked a charm, many thanks
